ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM

ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM - 1

ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM - 2

ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM - 3

ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM - 4

ASSY<SUP>®</SUP> 3.0 - SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM - 5

ASSY^® 3.0

Name: ASSY ® 3.0
Brand: Würth
SKU: 015335060

ASSY 3.0 joist hanger steel zn ptd. FT pan head AW
SCR-PANHD-WO-JOISTHNG-AW20-(A3K)-5X60MM
ASSY 3.0

Art.-no. 015335060

EAN 4053479274775

All versions

Similar products

Prices for customers after login

ASSY^® 3.0

Art.-no. 015335060

Prices for customers after login

Quantity

x 250 pcs

Show availability in Würth trade store

Exclusively for trade customers

Locate trade store
Login/Register
Call customer service: +420 323 041 141

With form-fitting joist hanger screw head, in particular for sheet preform wood connections in shopfitting, formwork construction, new builds and renovation.

Steel, galvanised, partial thread, joist hanger screw head, AW drive

Joins wood instead of splitting it

Reinforced head with enlarged contact surface

High contact pressure

Cylindrical shaft reinforcement to outer diameter beneath head

Form-fitting sheet preform connection and high shear-off values

Asymmetrical coarse thread

Rapid screwing and high extraction values

Patented tip with mating thread

Reduced splitting effect, rapid gripping and pin-point placement

AW drive

Wobble-free, secure placement of screw

Material

High-strength steel for high breakage torques/galvanised, blue coated (A2K).

Notice

The screws are not suitable for outdoor use and for rooms subject to short-term or continuous high moisture levels! Please use ASSY® 3.0 A2 stainless steel screws in these cases.

To attach metals to wood, machine a precise cutout in the metal tab.

ASSY 3.0 chipboard screws are optimised for use in wooden materials. When used in plastic anchors, a reduction of the load-bearing capacity is possible. Therefore, we recommend only using screws without optimised thread tips (drill bit, mating thread, ring thread, serrated edge, self-clearing groove, etc.) in plastic dowels, e.g. Würth ASSY D, prefix 0151 (countersunk head) and prefix 0153 (pan head).

Available work documents:

Timber dimensioning software, load tables and detailed processing instructions can be found on the service page www.wuerth.de/assy.

ETA-11/0190

Specifications of European Technical Approval ETA-11/0190 and concerning the sheet preform to be fitted must be observed.

Product information

Würth Catalogue

Datasheets(X)

CAD data (available after login)

Certificates/ Documents

Application area

Ideal for sheet preform connections that are to be disassembled again at a later point or for connections with high loads on thin wood cross-sections.

Comparable shear-off values and greater extraction values compared to 4.0 mm anchor nails.

Permitted for sheet preforms with a thickness of 1.5 mm.

Direct attachment of sheet metal and sheet preforms to coniferous timber, wooden materials produced from coniferous timber, board plywood, LV and hardwood. Pre-drilling optional in coniferous timber. Hardwood must be pre-drilled according to ETA 11/0190.

Instructions

Screw-in angle 0° to 90°.

Pre-drilling option in solid wood and wooden materials produced from coniferous timber permitted. Hardwood surfaces must be pre-drilled according to ETA 11/0190 (coniferous timber d = 3.0 mm; hardwood d = 3.5 mm).


Nominal diameter (d)	5 mm
Length (l)	60 mm
Head type	Pan head
Head diameter (d_h)	8 mm
Head height (k)	2.6 mm
Head details	Reinforced shaft neck
Internal drive	AW20
Thread type	Wood screw thread
Thread design	Full thread
Thread form	Coarse thread
Thread length (lg)	52 mm
Core diameter	3.3 mm
Shape of tip	Tip with counter thread
Angle of the tip	28 Degree
Material	Hardened steel
Surface	Zinc plated
Colour	Silver
Max. screw-in angle	90 Degree
Min. screw-in angle	0 Degree
Product weight (per item)	4.888 g
Suitable for use in the following materials	Board ply wood (BSP), Wood, Derived timber product, Hardwood, LVL, Softwood
Area of application	Metal plate, wood
Approval	ETA-11/0190
RoHS-compliant	Yes

Minimum clearances for joist hanger screws ∅ 5 mm for sheet steel-wood connections
		p_k < 420 kg/m³		p_k < 500 kg/m³		Default value
		Force II to grain direction	Force ┴ to grain direction	Force II to grain direction	Force ┴ to grain direction	Force II to grain direction	Force ┴ to grain direction
a₁	in grain direction	8.4 d	3.5 d	10.5 d	4.9 d	3.5 d	2.8 d
a₂	Perpendicular to grain direction	3.5 d	3.5 d	4.9 d	4.9 d	2.1 d	2.8 d
a_3,t	Stressed end of the end grain	15 d	10 d	20 d	15 d	12 d	7 d
a_3,c	Unstressed end of the end grain	10 d	10 d	15 d	15 d	7 d	7 d
a_4,t	Stressed edge	5 d	10 d	7 d	12 d	3 d	7 d
a_4,c	Unstressed edge	5 d	5 d	7 d	7 d	3 d	3 d

Minimum clearances for ∅ 4 mm and 4.4 mm anchor nails without pre-drilling for sheet steel-wood connections
		p_k < 420 kg/m³		p_k < 500 kg/m³
		Force II to grain direction	Force ┴ to grain direction	Force II to grain direction	Force ┴ to grain direction
a₁	in grain direction	7 d	3.5 d	10.5 d	4.9 d
a₂	Perpendicular to grain direction	3.5 d	3.5 d	4.9 d	4.9 d
a_3,t	Stressed end of the end grain	15 d	10 d	20 d	15 d
a_3,c	Unstressed end of the end grain	10 d	10 d	15 d	15 d
a_4,t	Stressed edge	5 d	7 d	7 d	9 d
a_4,c	Unstressed edge	5 d	5 d	7 d	7 d

Characteristic bearing capacities of anchor nails and joist hanger screws in kN in coniferous wood
Fastener in mm		Characteristic bulk density P_k in kg/m³
		350		380		410		430
		F_v,RK	F_ax,RK	F_v,RK	F_ax,RK	F_v,RK	F_ax,RK	F_v,RK	F_ax,RK
Würth Anchor Nails	4.0x40	1,68	0,74	1,82	0,78	1,95	2,05	1,11
	4.0x50	1,99	0,98	2,17	1,16	2,33	2,41	1,48
	4.0x60	2,15	1,23	2,28	1,44	2,41	2,50	1,85
	4.0x75	2,24	1,59	2,39	1,88	2,54	2,64	2,40
	4.0x100	2,27	1,72	2,42	2,02	2,58	2,69	2,59
Würth Anchor Nails collated	4.4x40	1,70	0,81	1,84	0,95	1,11	2,09	1,22
	4.4x50	1,88	1,08	1,99	1,27	1,48	2,19	1,63
	4.4x60	1,95	1,35	2,07	1,59	1,85	2,29	2,03
Würth joist hanger screws	5 x 25	1,49	1,20	1,58	1,28	1,36	1,74	1,41
	5x30	1,69	1,50	1,80	1,60	1,70	1,99	1,77
	5x35	1,91	1,80	2,04	1,92	2,04	2,26	2,12
	5x40	2,13	2,10	2,29	2,24	2,38	2,46	2,48
	5x50	2,29	2,52	2,41	2,69	2,86	2,59	2,97
	5x60	2,44	3,12	2,57	3,33	3,54	2,76	3,68
	5x70	2,58	3,66	2,71	3,91	4,15	2,92	4,32
Measured load capacity value: F_i,Rd= F_i,Rk x k_mod / Y_m with Y_m = 1.3
Calculation for the Würth anchor nail according to DIN EN 1995-1-1. Pull-out capacity for load capacity class 3 according to DIN EN 1995-1-1/NA. Würth joist hanger screws nacgh ETA-11/0190. Thickness of the sheet steel part 2 mm.

According to the following table, anchor nails can be replaced by joist hanger screws in the event of a shear force load
Anchor nail [mm]	ASSY 3.0 joist hanger screws [mm]
	Characteristic bulk density rk in kg/m³
	350	380	410	430
4.0x40	5x30	5x35	5x35	5x35
4.0x50	5x40	5x40	5x40	5x40
4.0x60	5x50	5x50	5x50	5x50
4.0x75	5x50	5x50	5x60	5x60
4.0x100	5x50	5x60	5x60	5x60
The different minimum clearances must be observed!

Characteristic bearing capacities of joist hanger screws in pre-drilled holes in hardwood in kN
Fastener in mm		Characteristic bulk density P_k in kg/m³
		530		540		550
		F_v,RK	F_ax,RK	F_v,RK	F_ax,RK	F_v,RK	F_ax,RK
ASSY 3.0 Joist hanger screws	5 x 25	2,74	1,67	2,78	1,70	2,83	1,72
	5x30	2,84	2,09	2,89	2,12	2,93	2,15
	5x35	3,17	2,51	3,20	2,55	3,23	2,58
	5x40	3,27	2,93	3,30	2,97	3,34	3,01
	5x50	3,42	3,51	3,45	3,57	3,49	3,62
	5x60	3,63	4,35	3,67	4,41	3,71	4,48
	5x70	3,81	5,10	3,86	5,18	3,90	5,25
Measured load capacity value: F_i,Rd= F_i,Rk x k_mod / Y_m with Y_m = 1.3.
Only valid for Würth joist hanger screws according to ETA-11/0190. Thickness of the sheet steel part 2 mm.

Required accessory:

Product

Description

Quantity

Price
/PU

AW® bit

BITS-AW20-1/4IN-L70MM

Art.-no. 06145720

E 6.3 (1/4")

AW® bit

BIT-AW20-LUMINOUSORANGE-1/4IN-L110MM

Art.-no. 06145820

E 6.3 (1/4")

Combination joist hanger 1.5 mm One piece

JOISTHNG-COMBI-(EXCRANKED)-120X160X1,5

Art.-no. 5390120160

Economical, lightweight joist hanger (angled outwards) for load-bearing connection of timber joists to wood, concrete or steel. Ideal for standard cross-sections

x 25 pcs

The packaging unit defines the number of articles in one packaging. In the catalog segment you can choose from different packaging units if a pop-up menu is displayed.

Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with Easy-/VarioScan. The packaging unit will be determined automatically.

The article number is made up of the following: VVVVAAABBB
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2

Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)

Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)

Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart, as well as in our General Terms and Conditions (GTC).

Fitting products for your order

ASSY® 3.0

ASSY^® 3.0