Adhesive sealing tape Eurasol® façade
ADHSEALTPE-EURASOL-FCDE-W60MM-L25M
Register now and access more than 125,000 products
UV-resistant, water vapour-permeable backing for use with façade membranes
Finger lift masking film for quick and easy application
Extremely strong adhesive and highly resistant to ageing
- Ensures permanent air-tight and windproof bonding
- Secure bonding down to -10 °C
Solvent free
Resistant to plasticisers
Does not contain environmentally harmful substances
This information is only a recommendation based on our experience. Test the product before use! During application and painting, both the technical data sheet and the specifications of the top-coat manufacturer must be observed.
Eurasol® façade sealing tape is ideal for bonding WÜTOP® Thermo façade membranes and has been tested on these films.
For best results, we recommend using these WÜTOP® films.
Datasheets(X)
Lasting bonding of façade films with open joint portion of max. 40% of the façade area and joint clearance up to 50 mm.
For bonding the overlapping sections of these films and connections and penetrations with corner construction.
Fix Eurasol® façade fastening tape to the overlap seam by removing just a few centimetres of the masking paper. On removing the masking paper, the adhesive tape is glued over the full length of the overlapping seam by pressing on it.
Please ensure sufficient contact pressure.
After adhesion, cut the adhesive tape with a knife.
Caution
The application surface must be dry and free from grease, chips and dust. Ensure that no standing water can build up within the bonded area. Do not subject the adhered tape to long-term tension.
Backing material | Coated polyester fibre |
Adhesive base | Acrylate dispersion |
Colour | Black |
Width | 60 mm |
Length | 25 m |
Min./max. processing temperature | -10 to 50 °C |
Min./max. temperature resistance | -30 to 100 °C |
Ultraviolet resistance | Yes |
Solvent-free | Yes |
Shelf life from production/conditions | Unlimited / in closed original packaging at + 5°C to + 23°C and 50% to 60% humidity |