Lightweight construction anchor W-KL
Lightweight construction anchor W-KL
DWL-(W-KL)-PLA-18X50
Art.-no. 090350
EAN 4011231846950
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Anchor made of ABS plastic for secondary mountings. Use in conjunction with a suitable plug screw
- High-quality ABS
- Fully resistant to rotting
- Thermally stable from -40°C to + 80°C
- Attachment via positive locking
- Anchorage without expansion pressure
- Small edge and axial clearance possible
- For mounting, we recommend the ASSY-D plug screw
Drill the hole
Install anchor
Mount component
Application area
- For secondary attachments in aerated concrete
- For the attachment of components in conjunction with a wood or particle board screw (e. g. ASSY-D)
- Outdoors or in wet rooms in conjunction with a stainless-steel screw
Material | ABS |
Anchor diameter | 18 mm |
Type description | W-KL |
Nominal drill-bit diameter (d 0) | 10 mm |
Required particle-board screw diameter | 4.5 - 6 mm |
Hole diameter in component (d Bau) | 6.5 mm |
Min. temperature resistance | -40 °C |
Max. temperature resistance | 80 °C |
Minimum component thickness (d) | 80 mm |
Embedding depth (h s) | 50 mm |
Centre-to-centre distance (a) | 100 mm |
| Performance data | |||
| Anchor diameter [mm] | Collar 18 | ||
| Recommended tensile load | Aerated concrete PB2 | Frec. [kN] | 0,25 |
| Aerated concrete ≥ PB4 | 0,33 | ||
| Plasterboard wall ≥ 5 N/mm² | 0,33 | ||
| Recommended shear load | Aerated concrete PB2 | Frec. [kN] | 0,30 |
| Aerated concrete ≥ PB4 | 0,40 | ||
| Plasterboard wall ≥ 5 N/mm² | 0,40 | ||
| Characteristic values | ||
| Axis distance | a ≥ [mm] | 100 |
| Edge distance | ar ≥ [mm] | 100 |
| Drill hole depth | t ≥ [mm] | 60 |
| Embedment depth | hS≥ [mm] | 50 |
| Minimum member thickness | d ≥ [mm] | 80 |
| Thread dia. screw | dthr [mm] | 4.5-6 |
| Nominal drill diameter | ddrl. [mm] | 10 |
| Hole diameter in component | dcon [mm] | 6,5 |
Product information
Datasheets(X)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
