PPE ring bolt
Plain steel ring bolt PPE EN795
SCR-RG-PSA-EN795-2P-M16
Art.-no.
516212816
EAN 4054458652331
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Secure anchor point for use as an anchor device
- For use as an anchor device for a safety harness in accordance with EN 361 using a suitable connection element in accordance with EN 362
- The anchor device is designed so that it can only be unscrewed using the special key provided.
Notice
- The threaded hole must run at a right angle to the contact surface
- Tighten the anchor bolt until it lies fully on the contact surface
- If the anchor device is dropped or there are any doubts about its suitability for use, the system must be replaced immediately
Certified according to standard EN-795-0426
Product information
Datasheets(X)
CAD data (available after login)
 | |
People load-carrying capacity | 2 |
Material | Steel |
Surface | Plain |
Thread type x nominal diameter (d1) | M16 |
Length (l) | 74 mm |
Thread length (metric thread) (l1) | 24 mm |
Height (h1) | 59.5 mm |
Ring height (b1) | 13 mm |
Ring thickness (s1) | 14.5 mm |
Internal diameter (d2) | 39 mm |
Outer diameter (d3) | 65 mm |
Diameter of contact surface (d4) | 56 mm |
Max. torque | 70 Nm |
Product weight (per item) | 796.500 g |