Pressure plate for tension anchor HTA
Tension anchor plate, HTA
TENSANCPLT-F.AIRTGT-HTA-58,5X50X10MM
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
To increase the tension resistance of tension anchor HTA
- Steel plate galvanised on all sides (S355 MC + Fe Zn 12c) as per EN 10025-2:2004
- Application in utilisation classes 1 and 2 in line with EN 1995:2013
Proof of Performance
CE labelling as per European Technical Approval ETA-14/0274
| Notes: |
| Würth anchor nails or ASSY 3.0 joist hanger screws according to EN 14592 or ETA 11/0190 are to be used as fasteners. The specified load-bearing capacities are for softwood with a characteristic density of ρk ≥ 350 kg/m³. Design value of the load-bearing capacity of a fastener: FVM,Rd = kmod/gM = F1,Rk with gM = 1.3 Design value of the steel load-bearing capacity of the tension anchor: FS,Rd = FS,Rk/gM2 with gM2 = 1.25 Design value of the total load-bearing capacity: F1,Rd = min {n x FVM,Rd; FS,Rd} with n = number of nails The design value of the tensile force in the anchor bolt FB,Ed is to be calculated with the design value of the tensile force of a tension anchor FEd. The minimum distances between fasteners for sheet steel-wood connections according to EN 1995-1-1 must be observed. The specified values given were calculated on the assumption of an immovable intermediate layer according to Blass and Laskewitz "Load-bearing capacity of connections with pin-shaped fasteners and intermediate layers". |
CE labelling as per European Technical Approval ETA-14/0274
Application area
For increasing the tension resistance of tension anchor HTA for anchoring supports, roof beams, timber frame constructions or solid wood elements.
 | |
Length x width x height | 58.5 x 50 x 10 mm |
Diameter of hole | 17 mm |
Number of holes | 1 PCS |
Weight | 200 g |
Surface | Zinc plated |
Material | Steel / steel |
Material standard | EN 10025- 2:2004 |
Approval | ETA-14/0274 |
| Characteristic load-bearing capacity and design value of the load-bearing capacity ("short") in load case F1 for Würth tension anchor HTA according to ETA 14/0274 | ||||||||||||
| Type | Format in mm | U-washer/base plate | KLED | Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN | Load-bearing capacity steel in kN | Coefficient kt | ||||||
| HTA | 4x40 | 4x50 | 4x60 | 5x35 | 5x40 | 5x50 | ||||||
| Lx60x60x3.0 | U-washer 30x3 mm | char. | FVM,Rk = | 1,59 | 1,87 | 1,93 | 1,88 | 2,10 | 2,29 | FS,Rk =35.0 | 3,79 | |
| Short | FVM,Rd = | 1,10 | 1,30 | 1,34 | 1,30 | 1,46 | 1,59 | FS,Rd =28.0 | ||||
| Lx60x60x3.0 | Base plate 10 mm | char. | FVM,Rk = | 1,59 | 1,87 | 1,93 | 1,88 | 2,10 | 2,29 | FS,Rk =45.0 | 3,79 | |
| Short | FVM,Rd = | 1,10 | 1,30 | 1,34 | 1,30 | 1,46 | 1,59 | FS,Rd =36.0 | ||||
| Required number of fasteners for HTA Lx80x80x3.0 depending on the connection of tensile load FEd to softwood C24 | ||||||||||
| FEd in kN | Würth anchor nail in mm Load-bearing capacity class 3 4x40 4x50 4x60 4x75 4x100 | ASSY 3.0 joist hanger screw in mm ETA-11/0190 5x35 5x40 5x50 5x60 5x70 | ||||||||
| 4 | 4 | 4 | 3 | 3 | 3 | 4 | 3 | 3 | 3 | 3 |
| 5 | 5 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 3 | 3 |
| 6 | 6 | 5 | 5 | 5 | 5 | 5 | 5 | 4 | 4 | 4 |
| 7 | 7 | 6 | 6 | 5 | 5 | 6 | 5 | 5 | 5 | 4 |
| 8 | 8 | 7 | 6 | 6 | 6 | 7 | 6 | 6 | 5 | 5 |
| 9 | 9 | 7 | 7 | 7 | 7 | 7 | 7 | 6 | 6 | 6 |
| 10 | 10 | 8 | 8 | 8 | 8 | 8 | 7 | 7 | 6 | 6 |
| Tension anchor connection - softwood C24 with 16 mm chipboard as intermediate layer | ||||||||||||
| Type | Format in mm | U-washer/base plate | KLED | Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN | Load-bearing capacity Steel in kN | Coefficient kt | ||||||
| 4x40 | 4x50 | 4x60 | 5x35 | 5x40 | 5x50 | |||||||
| HTA | Lx60x60x3.0 | U-washer 30x3 mm | char. | FVM,Rk = | 1,97 | 2,06 | 2,15 | 2,03 | 2,18 | 2,33 | FS,Rk =35.0 | 3,79 |
| Short | FVM,Rd = | 1,37 | 1,43 | 1,49 | 1,40 | 1,51 | 1,61 | FS,Rd =28.0 | ||||
| Lx60x60x3.0 | Base plate 10 mm | char. | FVM,Rk = | 1,97 | 2,06 | 2,15 | 2,03 | 2,18 | 2,33 | FS,Rk =45.0 | 3,79 | |
| Short | FVM,Rd = | 1,37 | 1,43 | 1,49 | 1,40 | 1,51 | 1,61 | FS,Rd =36.0 | ||||
| Tension anchor connection - softwood C24 with 15 mm OSB as intermediate layer | ||||||||||||
| Type | Format in mm | U-washer/base plate | KLED | Load-bearing capacity per fastener (anchor nail or joist hanger screw in mm) in kN | Load-bearing capacity Steel in kN | Coefficient kt | ||||||
| 4x40 | 4x50 | 4x60 | 5x35 | 5x40 | 5x50 | |||||||
| HTA | Lx60x60x3.0 | U-washer 30x3 mm | char. | FVM,Rk = | 2,03 | 2,09 | 2,18 | 2,08 | 2,23 | 2,38 | FS,Rk =35.0 | 3,79 |
| Short | FVM,Rd = | 1,41 | 1,45 | 1,51 | 1,44 | 1,54 | 1,65 | FS,Rd =28.0 | ||||
| Lx60x60x3.0 | Base plate 10 mm | char. | FVM,Rk = | 2,03 | 2,09 | 2,18 | 2,08 | 2,23 | 2,38 | FS,Rk =45.0 | 3,79 | |
| Short | FVM,Rd = | 1,41 | 1,45 | 1,51 | 1,44 | 1,54 | 1,65 | FS,Rd =36.0 | ||||
Product information
Datasheets (0)
Certificates/ Documents (0)
