Rubber valve SNAP-IN
Plug-in valve, rubber, for vehicles, chrome
TYRVLVE-TR413-CHROMCAP-11,3X42,5MM
Art.-no.
08794131
EAN 4011231806565
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
With chrome sleeve and cap for a stylish look
Notice
Snap-in valves allow for a maximum extension of 10 mm
Max. working pressure (DIN 7780): 4.5 bar (at +23°C)
When disassembling and reassembling the internal mechanism, make sure there are no air leaks after inflating the tyre
Instructions
Instructions for correctly fitting snap-in rubber valves
- check that there are no sharp or rusty edges on the hole in the rim
- lubricate the valve with plenty of tyre fitting paste or liquid lubricant
- place the valve into the hole in the rim and pull with suitable tools until it slots perfectly into place
Length (L) | 42.5 mm |
Suitable for rim-hole diameter | 11.3 mm |
Surface | Chrome plated |
Product information
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
