Submersible pump Easy-Sub 400W
Submersible pump Easy-Sub 400W
SUBMPMP-(EASY-SUB)-400W
Art.-no.
099370280
EAN 4052703044443
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Robust, reliable submersible waste water pump with mounted float switch
- Grain size up to 10 mm
- Cable length 20 m + safety plug
- Fully submersible to 3 bar
- Longitudinally water-tight cable entry protects the winding from water ingress
- Prevents the motor from overheating on rotor blocking, unequal phases, voltage fluctuations
- Low-wear F-impeller (free current vortex)
- Incl. Storz C-coupling
Product information
Datasheets(X)
Application area
Draining ditches, shafts and containers, drainage systems and water removal
Max. feed quantity | 220 l/min |
Max. delivery height | 11.5 m |
Nominal voltage | 230 V/AC |
Nominal current | 3.1 A |
Motor output | 0.4 kW |
Weight of machine | 13 kg |
Connection thread | ET 2 inch |
Connection coupling | Storz C |
Min./max. temperature conditions | 0 to 40 °C |
Residual water height | 88 mm |
| Performance data | ∅ pressure joint | 2 inch | |
| Feed medium | Type of medium | Wastewater up to 10 mm grain size | |
| Temperature | 0–40°C | ||
| Pump | Components | Impeller | F-impeller (free flow vortex) |
| Shaft seal | Double slide ring seal with additional shaft sealing ring | ||
| Material | Impeller | Polyurethane | |
| Housing | Grey cast iron | ||
| Installation unit | Stainless steel VA (1.4301) | ||
| Slide ring seal | Coal against ceramic | ||
| Engine | Design | Fully submersible, IP 68 wet installation | |
| Voltage | 230 V | ||
| Motor protection (installed) | Thermal protection | ||
| Material | Housing | Stainless steel VA (1.4301) | |
| Shaft | Stainless steel VA (1.4024) | ||
| Cable | Rubber, H07 RN-F (20 m) | ||
| Pressure outlet | Threaded connection Storz C | ||