Tapping screws ZEBRA PIAS
pias elct dct steel zinc plat. flng rais cs hd AW
SCR-DBIT-PANHD-FLG-AW20-(A2K)-4,2X13
Register now and access more than 125,000 products
- Screws with AW drive
- This mounting system of slotted ducts on electrical panels saves a great deal of time
- For the mounting to comply with standard IEC 23-22 (all elements must be insulated or covered with insulating material), it is advisable to apply a screw cap. It is covered with insulating material which prevents any sharp edges from damaging the wire covering
- The flange head spreads the surface pressure over a larger area preventing damage to material
- Thread compliant with DIN 7970
Standard IEC 23 - 22 - paragraph 2.2.05: Duct fasteners must be INSULATED OR COVERED WITH INSULATING MATERIAL and must not have any sharp edges that may damage cabling
Insert AW20 L 25 mm 1/4 included in each pack
 | |
Material | Steel |
Surface | Zinc plated |
Nominal diameter (d1) | 4.2 mm |
Length (l1) | 13 mm |
Head height (k1) | 2.4 mm |
Drill tip length (lp) | 7.8 mm |
Head type | Pan head |
Internal drive | AW20 |
Thread type | Self-tapping screw thread |
Min./max. material thickness | 1.75-3 mm |
Min./max. recommended installation speed (idling) | 1200-1800 rpm |
RoHS-compliant | Yes |
Datasheets (0)
Certificates/ Documents (0)
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!
