Tile levelling system set 201 pieces
Tile levelling system set Sysko
TLE-LEVLSYS-201PCS
Register now and access more than 125,000 products
For universal use
Suitable for tile thicknesses of up to 20 mm
Avoids costly repair work
- Precise alignment of the tiles avoids countersinking, ensures a high degree of uniformity and saves time.
- The high-quality plastic of the tension plate ensures that controlled tensioning is achieved and premature break off is prevented.
Plastic-free joints
The tension plate breaks off beneath the tile, preventing cracking due to plastic parts in the joint material.
Tiles do not slip or move
- The large surface area of the cross piece ensures uniform pressure distribution during the clamping process, thus preventing damage to the tile surface.
- The cross piece ensures a stable stop for the next tile.
For all large-sized floor and wall tiles up to 20 mm
Push the base plate of the clamping spigot under the last tile laid up to the clamping tab. Place the bell onto the clamping spigot. Use the optional tile pads for delicate surfaces. Preset the levelling pliers to "tension", push in to the clamping spigot and perform clamping. For subsequent corrections to the joint appearance, the bell can be easily removed and re-applied by pushing the tab to the side. This does not destroy the clamping spigot. Once the adhesive has cured, set the levelling pliers to "remove" and place over the clamping spigot. The clamping tab is cut off in the adhesive bed. Remove the bell and the clamping tab.
Datasheets(X)
Just leave the field empty if you don't know the packaging unit when directly entering the article number in the shopping basket or when importing with v
VVVV = 4 digits for prefix number (please note that the first digit is currently always 0)
AAA = 3 digits for dimension part 1
BBB = 3 digits for dimension part 2
Example article number structures:
Example 1: Screw with dimensions of 4x10 mm:
VVVVAAABBB
00574 10 (2 spaces between the 4 and the 10)
Example 2: Screw with dimensions of 10x20 mm:
VVVVAAABBB
005710 20 (1 space between the 10 and the 20)
Example 3: Flat washer with an internal diameter of 6 mm:
VVVVAAABBB
04076
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.
Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
