Vulcanised fibre disc, ceramic abrasive grain
Vulcanised fibre disc, ceramic grain
FBRDISC-CG-G120-D125X22MM
Art.-no.
0580612512
EAN 4045727978214
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Vulcanised fibre disc for a high removal rate with low contact pressure, for steel/stainless steel.
High removal rate with cool sanding
Due to high-performance abrasive grain and abrasive cover layer
Low contact pressure
Due to high-performance abrasive grain
Long service life
Due to ceramic abrasive grain
Notice
- Use fibre discs only with approved, undamaged support plates
- Always wear appropriate protective equipment, e.g. safety glasses, gloves, hearing protection etc.
- Store out of direct sunlight and away from heat sources. Do not store in damp environments or on the floor
- Store in the original packaging at 18–22°C and 45–60% relative humidity
- Free from iron, chlorine and sulphur (≤ 0.1%)
Product information
Datasheets(X)
Application area
- For use on hand-held pneumatic or electrical angle grinders with a circumferential speed of up to 80 m/s in conjunction with a support plate
- For grinding edges and surfaces, preparatory and finishing work on weld seams, dressing and smoothing
- For stainless steel, rust-resistant, acid-resistant and heat-resistant steels (high-alloyed), steel and aluminium
Diameter (Ø) | 125 mm |
Bore diameter | 22 mm |
Grid size | 120 |
Recommended rotation speed | 10000 rpm |
Backing material | Vulcanised fibre |
Material of abrasive medium | Ceramic grain |
Colour of disc | Red brown RAL 8012 |
Adhesive base | All-synthetic resin with grinding-active additives |
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!