Wing-tip drilling screw SC8 countersunk milling head
Steel black countersunk milling head SC8 TX
SCR-DBIT-WNG-CS-SC8-TX30-(SOS)-6,3X60
Art.-no.
0219980660
EAN 4065233042520
Prices for customers after login
Show availability in Würth trade store
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
High-performance drilling screw for secure direct screwing of wood to steel substructures
Notice
- Only install using application tools with a depth stop and claw coupling
- Drilling screws must be processed with a suitable drill driver (e.g. cordless drill driver with depth stop)
- The use of impact screwdrivers is not permitted
- Drilling screws must be attached perpendicular to the surface of the component
Wing-tip drilling screws must be appropriately tested for usability for each application case.
Product information
Datasheets(X)
Application area
- Wooden floors on steel substructures
- Suitable for installation on steel beams with a steel quality up to a yield strength of 460 MPa (tensile strength Rm 520-670 MPa)
 | |
Nominal diameter (d) | 6.3 mm |
Length (l) | 60 mm |
Head diameter (dk) | 12 mm |
Drill tip length (lp) | 12 mm |
Other standard | WN 219-9 |
Material | Steel |
Surface | Special coating according to specifications |
Head type | Countersunk milling head |
Internal drive | TX30 |
Min. recommended substructure thickness | 3 mm |
Max. material thickness to be drilled through (metal) (lU) | 8 mm |
Max. attachment thickness (lB) | 42 mm |
RoHS-compliant | Yes |