ZARGENBLITZ door jamb assembly tool
Door jamb assembly tool frame flash
DRJMBTL-DOORFRAME
Art.-no.
0695965110
EAN 4099618300219
Show availability in Würth shop
In order to check the stock in a Würth branch, please log in.
If you have any questions, please call our service hotline at +420 323 041 141.
You are not yet a Würth customer or do not yet have access data to the Online Shop? Then register now in just a few steps. After a successful check of the entered data, you will have immediate access to the stock inquiry as well as all prices and can immediately order.
Exclusively for trade customers
Register now and access more than 125,000 products
Assembly tool for quick and easy installation of wooden door jambs for jamb depths of 80-330 mm
- Quick and precise assembly and installation of door jambs
- No deformation of the door jamb during installation
- Quick and easy transportation of the door jamb to the installation location
- Four detent points for four different jamb widths
Detent point 1 - 591 mm
Detent point 2 - 716 mm
Detent point 3 - 841 mm
Detent point 4 - 966 mm
- Infinitely variable width adjustment is possible via the locking screw
- It is possible to insert glass door frames and flush-closing door frames
Instructions
1. Set the door jamb width
2. Place door jamb on frame
3. Align the Zargenblitz with the lower edge
4. Screw the frame flash onto the drill brushing with the frame
5. Transport safely, securely and easily
6. Insert door jamb
7. Align the door jamb with the adjustable feet and spirit level
8. Fold down retaining flaps for deep frames
9. Fix the door jamb with AMO bags
10. Foaming
11. Cure
12 Remove door jamb - done!
Application area
- For door jambs with a sealing groove width of 11-13 mm
- The most common groove width is 12 mm
Min./max. clamping width | 583-980 mm |
Product weight (per item) | 8500.000 g |
Material | Aluminium / aluminium |
Product information
Datasheets(X)
